| Home |
| About Polyurea |
| Polyurea Products |
| Product Usage |
| Polyurea Job Profiles |
| Contact Us |
| FSI Affiliates & Links |
FSI Coatings Polyurea Products |
|
| Polyurea Product Descritpions | Download Data Sheet |
| PolyVers PV 320 is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. PV 320 is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates. Its extremely fast gel time makes it suitable for applications down to -20oF without special conditioning of the component resins and isocyanates. PV 320 produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1000 mils without appreciable sag or runs. PV 320 may be applied in all positions and to any suitably prepared substrate. PV 320 is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. PV 320 is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. PV 320 is available in special formulations for use as cathodic disbondment resistant membrane. | |
| PolyVers PV 350 is a fast set, rapid curing, 100% solids, flexible, two component polyurea elastomer spray coating material. PV 350 is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on concrete substrates. Its extremely fast gel time makes it suitable for applications down to -20oF without special conditioning of the component resins and isocyanates. PV 350 produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1000 mils without appreciable sag or runs. PV 350 may be applied in all positions and to any suitably prepared substrate. PV 350 is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. PV 350 is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. | |
| PolyVers PV AquaVers 405 is a fast set, rapid curing, 100% solids, flexible, two-component pure polyurea elastomer spray coating material. PV AquaVers 405 is potable water approved in accordance with ANSI/NSF 61. PV AquaVers 405 is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on concrete and other substrates. Its extremely fast gel time makes it suitable for applications down to -20oF without special conditioning of the component resins and isocyanates. PV AquaVers 405 produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1000 mils without appreciable sag or runs. PV AquaVers 405 may be applied in all positions and to any suitably prepared substrate. PV AquaVers 405 is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. PV AquaVers 405 is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. | |
| PolyVers VT-40 Finish Coat is a combination of Viton and PTFE, offering outstanding chemical, temperature, permeation, and abrasion resistance. VT-40 Finish Coat is designed to be used in combination with LC-25 Lock Coat and PolyVers Fast Set Spray materials. VT-40 Finish Coat is a heavy solids protective top coating suitable for most service environments. | |
| FSI Coatings, Inc 11000 Metro Parkway, Suite 20 Fort Myers, FL. 33912 FL. Cert. #CPC044101 |
Phone: (239) 275-6235 |
© Copyright 2007 - FSI Coatings, Inc.